Goplus MIG 130 Welder Review – All Details You Should Consider

WelderIt is reader-supported. When you buy via links on our site, we may earn an affiliate commission at no cost to you. learn more.

Many people out there are looking for a welder that can efficiently perform light-duty tasks. Whether they’re at home or at work, a welder like this always comes in handy. This is especially the case with those that want to keep their wallets full along the way.

Luckily, the market offers many products that match these requirements. One of the most affordable yet successful ones is Goplus MIG 130 Welder. It’s able to perform a variety of tasks while maintaining its low weight and portability.

Are you eager to discover more about the details that make it a suitable choice? If you answered yes, you’ve come to the right place. In the following paragraphs, we’ll go over the notable features and options it offers, its specifications as well as advantages and disadvantages. So, let’s go!

Goplus MIG 130 Welder Review - Features To Keep An Eye On

Specifications

  • Weight: 35 pounds
  • Size: 13.4 x 7.3 x 11.4 inches
  • 10 levels of wire feed speed
  • Input: 110V
  • 4 levels of current flow adjustments

Portable And Lightweight

Among the main things that attract people to this welder is its portability. As a small and compact model, it can be carried everywhere. There is a handle on the welder’s top that enables users to pick it up at once. This comes in handy if your tasks require frequent moving around.

Moreover, it’s lightweight. This not only contributes to its portability but it makes the welder easier to store. With only 35 pounds, it’s definitely one of the lightest machines for welding out there. Still, it should be noted that the body consists of stainless steel so that the welder is durable. Thanks to this, users can be sure that they get a product that will last for a longer time while at the same time maintaining its small and lightweight design.

Power Input And Output

When you take into consideration the affordability of this model, it’s understandable that it isn’t really suitable for all types of tasks. In fact, most of the welders aren’t. Instead, they operate the most efficiently either for lighter jobs or heavy-duty ones. The Goplus MIG 130 welder favors the first type. That’s why it’s among the top choices for homeowners and hobbyists.

This is largely dependent on the power input and output. More precisely, this model has a maximum output of 105 amps and needs 110 volts to operate. Therefore, lighter tasks can be completed without any serious issues. Still, it operates well on sheet metal as well as auto work. So, it’s a versatile model and that’s among the main reasons people like to purchase it.

Versatile

Since it’s right there in the name of the welder, itself, people usually assume that they can use the Goplus MIG 130 just for MIG welding and related tasks. But, that isn’t entirely true. Moreover, the welder can help you with a number of other tasks. That is why many consider it to be pretty versatile when it comes to welding techniques.

Flux-cored arc welding is another welding technique you can perform with this welder. This type of welding is gasless, so you don’t have to buy additional gas cylinders. Additionally, this shields the area where you’re welding from oxidation.

Heat Modifications

The level of heat which is achieved with the welding may be crucial to the successful execution of the task as well as the overall quality. Because of this, many consider numerous heat settings to be a real asset in a welder. It seems as though the manufacturer took this into account, too. It incorporated even four different settings regarding the welder’s heat.

Typically, different projects require different heat levels. So, make sure you know which level of heat you need and set the appropriate level out of the four.

To illustrate, if you need a deeper weld, then you’ll most likely achieve it with more heat. What’s more, a higher speed may be recommended too in this case.

Goplus MIG 130 Welder Review

Protection From Overheating

Thermal overloading and overheating have been a serious issue that many people who are welding have faced. This can often lead to horrible situations like fires and hazards. And you definitely don’t want that to happen in your workplace.

Because of the danger, these situations may cause, companies have worked on prevention mechanisms. Some of the best welders now have them. The overheating protection shuts down the entire welder when you’re working with it for too long. This will allow the machine to lower its temperature and cool off.

Be careful not to exceed the welder’s duty cycle. This can result in permanent damage to the unit. The above-mentioned protection mechanism plays a role in preventing this.

Accessories

Even though top welders have all the necessary features to deliver excellent results, accessories still play a significant role. They enhance the performance and can impact the opinion the consumer has on the entire experience. Some accessories are sold separately according to your present needs. The good news is that some are included with the purchase of the world.

The Goplus MIG 130 welder has a few of these accessories that come when you buy it. Not including the gun and the welder, you also receive a reel of welding wire, a mask for protection as well as a brush for easier maintenance. This is considered by many as enough to enable you to start with welding immediately. It’s worth noting that you may need to buy a welding helmet as just a simple mask may not be enough due to the sparks and debris.

One thing that users should watch out for is the number of accessories they buy. As we mentioned, they aren’t crucial to the welding process, but can significantly improve it and help you. That’s why many people can fall into the trap of spending hundreds of dollars on accessories, which they don’t presently need. So, we suggest to guide yourself by two factors and they are price and current preferences.

Speed Settings

The ability to adjust the speed influences the performance and even the quality of the weld. As we stated before, when you pair it with the adequate heat level, the customization of the machine is increased.

With that being said, this welder has ten wire feed speed levels. This is more than enough to tailor it according to your needs and the welding project you’re going to work on. For instance, if you have to weld a thicker material, a higher speed may be more appropriate and vice versa.

Warranty Period

Customers always want a longer warranty period. This means that if something goes wrong with the product, you know that the company will take care of repairing it or replacing it with a new one. This is applicable for most of the products, including welders. The importance of the warranty may be even increasingly more important as a welder unit can represent a real investment and is essential for your work. So, you want to make the most out of it.

The Goplus MIG 130 welder doesn’t have a very long warranty period. The manufacturer envisioned it to be only six months long. This is considered by many as an aspect that can be improved upon. However, this shouldn’t surprise users. That’s because the welder’s price is pretty low and affordable, so it’s expected for the warranty period to be a bit shorter when compared to similar models.

Pros
Cons

Frequently Asked Questions (FAQ)

Q. What type of output does this machine have?

Answer: It has an AC output. But you can modify it with reversible leads.

Q. Can this machine weld stainless steel?

Answer: It isn’t recommended to weld stainless steel with it as it’s predominantly suitable for light tasks. Yet if you get a wire for flux core this is possible and according to some users, it does a great job at it.

Final Words

Finally, we would like to hear your thoughts and opinions. It’s clear that this is a versatile and quality welder that’s worth at least checking out. Due to the many options and features, it can perform many tasks, as well. But did it leave an impression on you? Or do you maybe have one at home already? Tell us everything here in the comments section.

Read More: 10 Best Mig Welder Reviews – [110V, 115V & 120V]

Rate this post